Description:

The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.

Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse). 

Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. 

Warranty 

• 365 days warranty 
• Defective items must be reported and returned within the warranty period ( must be in the good condiction) and pls list us for what the defecit is ,also with your order number , so we can repale new items to you within the expired warranty 

• We accept Alipay , West Union , TT ,Paypal 
• If you submit the order ,pls pay your order timely , so we can prepare and ship out at once 

• Worldwide shipping 
• Orders proecessed within 3 working days after confirm your payment 
• We only ship to the address you leave in the order , pls check your receiving address is right 
• The images shows are not 100% same as the items you will receive , it is for reference only 

• We maintain high standards of excellence and strive for 100% customer satisfaction! 
• If you satisfied with our items and service , pls give us a five starts feedback 
• Pls contact us to solve the issue before you leave us any negative and netural feedback